call us today: +353(0) 1-411-1652 Service Calls LoCall: 1890-353-887 email us: support@dimension.ie

Elevators & Lifts

highspeeddoors-elevators

Dimension Elevators & Lifts.

Goods / Passenger Lifts

Hydraulic Goods / Passenger Lifts

Goods Lift with passenger transport
Hydraulic Goods-Passenger Lifts

LP / LPA / LPG / LGG / LPS – Goods Lift with passenger transport
Hydraulic Goods-Passenger Lifts

The Dimension Elevator Goods-Passenger hydraulic lift is ideal for applications where goods with capacity’s from 500 kgs – 10,000 kgs are required to be accompanied by passengers and transported vertically in an safe, efficient and economical manner. These lifts meet the EN81-2:1998 requirements and certification process as per CE certification under the Lift Directive 95/16 EC.

For design assistance, including CADs & specifications,
please contact Dimension Engineering’s Major Projects team:
Tel.: +353(0)1 411 1652
Fax: +353(0)1 412 3816

Refer to our Goods / Passenger Lifts below

Dimension Engineering Goods / Passenger Lifts.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

  Goods / Passenger Lifts for optimised material flow and improved efficiency.

Aside from providing a customer focused engineering solution our hydraulic goods-passenger lifts offer the following benefits;

A) The principal of hydraulic lifts has proved extremely reliable for many years and are considered the workhorses of the industry.
B) Minimum headroom and pit depth requirements
C) The pump room location is flexible and while the preferred option is adjacent to the lift shaft at the lowest level served the hydraulic tank, pump and motor unit with the electrical panel can be located on any floor and up to 5 meters from the lift shaft.
D) Advances in engineering have lead to low-noise operation achieved by means of submerged drive assemblies combining efficient motors, accurate screw pumps and electrically regulated control valves.
E) Customised lift cabins, rated loads, ATEX options, etc are available to match clients specific requirements.

Our hydraulic goods-passenger lifts are available with a variety of door options as follows;

LPG model

– a goods-passenger lift with manual landing doors and an automatic centre opening tube member car door. This results in reduction in shaft space for equivalent clear door opening, and maximum car floor availability as clear door opening width corresponds to usable cabin floor width. Also this combination eliminates the risk of damage to doors due to ‘racing’ the door’s during loading.

LGG model

– a goods-passenger lift with automatic centre opening tube member car and landing doors. This results in reduction in shaft space for equivalent clear door opening, and maximum car floor availability as clear door opening width corresponds to usable cabin floor width.

LPS model

– a goods-passenger lift with automatic sliding centre opening shaft and landing doors. The doors can be fire rated, powder coated, stainless steel and supplied with heavy duty tracks.

Passenger Lifts

Passenger Lifts


Machine Roomless (MRL) Passenger Lifts

  • Traction MRL
  • Hydraulic MRL
  • Fire Fighting MRL

MRL lift’s have been engineered to reduce shaft space

In applications such as small to medium rise residential & office buildings the Dimension Elevator traction MRL lift provides superior ride quality, high quality decorative finishes, & creates more usable space with reduced construction costs. This is achieved through the elimination of a dedicated motor room as required by traditional overhead traction applications.

MRL options have been designed to meet market demands & ensure delivery periods are kept to an absolute minimum.

For design assistance, including CADs & specifications,
please contact Dimension Engineering’s Major Projects team:
Tel.: +353(0)1 411 1652
Fax: +353(0)1 412 3816

Scenic Passenger Lifts

Panoramic/Scenic Lifts

Elevators aren’t always just about moving people. They can, and sometimes should, be a feature of the building in their own right. Scenic lifts, aside from their functional ability, can be a focal point of any building providing a combination of elegant finishes and all-round visibility – ideal for making the most of an open hotel foyer or shopping centre atrium.

For design assistance, including CADs & specifications,
please contact Dimension Engineering’s Major Projects team:
Tel.: +353(0)1 411 1652
Fax: +353(0)1 412 3816

Refer to our Passenger Lifts below

Dimension Engineering Passenger Lifts.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

  Passenger Lifts for optimised material flow and improved efficiency.

All components & materials used in our MRL lift’s have been engineered to reduce as much shaft space as possible while still complying with EN81-1:1998 requirements & meeting the certification process CE certification under the Lift Directive 95/16 EC.

Examples of how this space saving is achieved is;

a) through the use of a compact geared or gearless motor or specially engineered hydraulic tank installed at the top/bottom of a conventional lift shaft,
b) by integrating the lift control panel with the landing door & frame.
c) Installing major electrical components such as the VVVF drive, emergency battery drive system etc, inside the lift shaft.

Where a low rise application exists an alternative is our hydraulic MRL. These hydraulic MRL lifts have the advantage of reduced installation costs & provide a cost effective solution when low traffic levels are anticipated.

Each lift can be individually-manufactured to suit a particular architectural requirement or design concept and options include:

  • Variable car sizes and shapes to suit individual projects
  • Bespoke car finishes to suit clients tastes
  • Can be installed in existing or new buildings
  • Special paint options to shaft steelwork available
  • Various degrees of cladding materials option
  • Lift Directive compliant
  • Option of Traction and Hydraulic drives
  • Traction – gear above or gear below
  • Machine Room Less Option

Hydraulic Goods ONLY Lifts

Hydraulic Goods ONLY Lifts

Type N: Type T: Type K:

Hydraulic Goods-Only Lifts

The Dimension Elevator Goods-Only hydraulic lift is ideal for applications where passengers are not required to travel with goods.

For design assistance, including CADs & specifications,
please contact Dimension Engineering’s Major Projects team:
Tel.: +353(0)1 411 1652
Fax: +353(0)1 412 3816

Refer to our Hydraulic Goods ONLY Lifts below

Dimension Engineering Hydraulic Goods ONLY Lifts.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

  Hydraulic Goods ONLY Lifts for optimised material flow and improved efficiency.

The following is a summary of the main features of this unit;

  • These lifts meet the Machine Directive 98/37/EC and are NOT to be used for movement of passengers.
  • These units are suitable for goods with capacity’s from 300kgs – 2,000kgs with different cabin sizes to suit most requirements.
  • The landing entrances are protected by either a single or double leaf hinged door with a door width from 800mm – 1,400mm.
  • The unit is operated with a call & send push button system located on each landing with a lift here indication. These are located in the landing door frame.
  • The lift cabin is constructed with a chequer plate flooring, folded sheet steel walls & no ceiling.
  • The lift can be installed in a brickwork shaft or a free standing steel structure with folded sheet steel cladding. Dimension Elevator can provide the steel structure if required.
  • The lift is driven by a electro hydraulic drive unit contained in a lockable control cabinet. This cabinet can be located either side of the shaft at the lowest floor level. A separate motor room is not required.

Disabled Access Lifts

Disabled Access Lifts

Disabled Access Lifts

The ideal lifting platform for public & commercial buildings

There is an ever-increasing demand for improved accessibility to public & commercial buildings, specifically for people with limited mobility. The A1 is the cost effective solution, a lifting platform adaptable to multiple environments. On the market since 1995.

For design assistance, including CADs & specifications,
please contact Dimension Engineering’s Major Projects team:
Tel.: +353(0)1 411 1652
Fax: +353(0)1 412 3816

Refer to our Disabled Access Lifts below

Dimension Engineering Disabled Access Lifts.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

Disabled Access Lifts for optimised material flow and improved efficiency.

Advantages:

  • Flexible in size of platform & structural design
  • High quality lift with a robust, self-supporting shaft
  • 50 mm pit required for level entry, with ramp no pit
  • Low overall cost compared to conventional lifts
  • Lifting capacity up to 630 kg
  • Travel up to 12 meters
  • No major construction work necessary
  • All machinery, as well as the electrical system, is housed inside the shaft enclosure

Reliability

Since 1995, more than 8500 A1s have been installed in public & commercial buildings in more than 15 different countries around the world. The product has clearly proven itself to be reliable. The lifetime of an A1 is the equivalent of the lifetime of the building in which it is located. A1stands for high levels of quality & reliability. It is also simple & quick to install has a short maintenance time &, most importantly, is safe & comfortable to use.

 

Operation

A1 is safe & easy to use. Enter the lift & operate it by continuously pressing the button for the desired floor “hold to run”. Stop the lift at any time by releasing the button; start it up again by pressing the button again. The platform operation console houses light, large tactile push buttons which also provide emergency stop & alarm functions. All edges are guarded by sensors &, in the case of an emergency, the lift can be pulled manually or by an optional battery system to the closest floor.

Installation

The A1 requires very little construction work & is easy to install. All that is required is an available floor area & an aperture of 1405 mm x 1630 mm. The lifting platform requires a 50 mm pit only. If delivered with a ramp, the pit is not required. Installation can be completed in 2-3 days.

Remarkably, the A1 does not have an external machine room. All the necessary machinery & the electrical system are housed inside the shaft enclosure – “what you see is what.”

Underfloor Lifts

Underfloor Lifts

Hydraulic Underfloor Lifts

Hydraulic Underfloor Goods-Only Lifts

The Dimension Elevator Underfloor Goods-Only hydraulic lift is ideal for applications where it is not possible to have a shaft structure on the upper landing. The floor opening in the upper landing is automatically sealed by a Baldachin cover when the lift is parked at the lower level. This cover can be walked on and/or driven on.

Request further information or talk to an agent

Refer to our Underfloor Lifts below

Dimension Engineering Underfloor Lifts.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

Underfloor Lifts for optimised material flow and improved efficiency.

The following is a summary of the main features of this unit;

  • These lifts meet the Machine Directive 98/37/EC and are NOT to be used for movement of passengers.
  • These units are suitable for goods with capacity’s from 300 kgs – 2,000 kgs with different cabin sizes to suit most requirements.
  • The bottom entrance is protected by either a single or double leaf hinged door with a door width from 800 mm to 1,400 mm.
  • The unit is operated with a call and send continuous pressure push button system located on the upper landing only with a lift here indication and key switch control.
  • The lift cabin is constructed with a chequer plate flooring, folded sheet steel walls and no ceiling.
  • The lift can be installed in a brickwork shaft or a free standing steel structure with cladding. Dimension Elevator can provide the steel structure if required.
  • The lift is driven by a electro hydraulic drive unit contained in a lockable control cabinet. This cabinet can be located either side of the shaft at the lowest floor level. A separate motor room is not required

Hydraulic Lift Tables

Lift Tables

Hydraulic Lift Tables

Internal door with SoftEdge and tubular drive

For logistics areas and supermarkets Storage shelves often do not permit a gearbox that protrudes on the side. Here, the high-speed door V 2715 SEL R with the tubular drive integrated in the door shaft is an optimum solution.

Refer to our Hydraulic Lift Tables below

Dimension Engineering Hydraulic Lift Tables.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

Hydraulic Lift Tables for optimised material flow and improved efficiency.

Empty section. Edit page to add content here.

Car Lift

Car Lifts

Hydraulic Car Lifts

Hydraulic Car – Passenger Lifts

The Dimension Elevator Car-Passenger hydraulic lift is ideal for applications where vehicles accompanied by passengers are required to be transported vertically in an safe, efficient and economical manner. As per Lift Directive where passengers travel in a lift it is a requirement that the lifts meet the EN81-2:1998 and the certification process as per CE certification under the Lift Directive 95/16 EC.

For design assistance, including CADs & specifications,
please contact Dimension Engineering’s Major Projects team:
Tel.: +353(0)1 411 1652
Fax: +353(0)1 412 3816

Refer to our Car Lifts below

Dimension Engineering Car Lifts.

Our high standards ensure you high security from the development stage through production and quality assurance up to professional fitting.

 Car Lifts for optimised material flow and improved efficiency.

Aside from providing a customer focused engineering solution our hydraulic vehicle lifts offer the following benefits;

A) The principal of hydraulic lifts has proved extremely reliable for many years and are considered the workhorses of the industry.
B) Minimum headroom and pit depth requirements
C) The pump room location is flexible and while the preferred option is adjacent to the lift shaft at the lowest level served the hydraulic tank, pump and motor unit with the electrical panel can be located on any floor and up to 5 meters from the lift shaft.
D) Advances in engineering have lead to low-noise operation achieved by means of submerged drive assemblies combining efficient motors, accurate screw pumps and electrically regulated control valves.
E) Customised lift cabin sizes are available depending on the type and size of vehicles that are to be moved.
F) Our lifts are provided with automatic sliding centre opening shaft and landing doors as standard. The doors can be fire rated, powder coated, stainless steel and supplied with heavy duty tracks. We also provide an option of tubemember doors which maximises the cabin floor space but requires a reduced shaft space.
G) Options include;

  • Traffic lights on the landings
  • Vehicle positioning indicator in the lift
  • Remote controls
  • Pull chord on landings

logo-grey

You can rely on our local presence and global expertise to move your business forward.

For service and sales inquiries, please refer to the links opposite.

Contact Details

Dimension Twitter Feed

No tweets found.
MENU